Garage Star Miata Fender Braces

Over the past year and a half, we've been working on several different designs for these fender braces and have logged many hours of track testing.

Garage Star fender braces help eliminate the rattle and cowl shake that you have with some Miatas. Over the past year we've been doing numerous amounts of track and street testing on the fender braces. We have gone through 3 different designs before going with our current design. On the track our drivers have found the braces to help with keeping the car stable on high speed turns.For daily use I've found these to help get rid of the mild cowl shake the car had at 70 mph. Also we have noticed less rattle and shaking over bumpy roads. It also made the car more stable while having fun on those on/off ramps.

Weight of one bracket is just 2.8 pounds!

See what others are saying about the Garage Star Fender Braces

Installed mine over the weekend. As others have said these are super light and well made. Fitment was spot on and really like the details such as captive nuts on the backing plates which help with installation.
Definite improvement in front end stiffness. !


These braces do add something for the on track guys also. as said earlier for dd-ing the small bumps, wash board, pot holes, etc now get sucked up with a nice thump and not the usual noises that one hears when hitting these. on the track it add great feeling through the steering wheel. the two big things i noticed was the response in mid corner (i could play around with the steering as i pleased, either inducing understeer if i try to push the front just a little to hard, but the feeling was right there, i could easily feel the fronts giving up and dial back the angle maybe between 2-5 degrees) also the bumps didnt upset the front end as much. this was noticed when going through a corner and the loaded front tire hit a bump, it soaked it up much better compared to without the brace. i to agree with tracing the bottom door jam before loosing it up, it will make life easier. my time of install was not recorded as i already had my fenders removed from another project, but i wouldnt say longer than 2 hours if you have all the linings and such removed, if not side for 3-4

Justin Ross

Ok, so I've had these on for a couple of days now, and I am glad to report that they do indeed do something. lol

After driving around for a couple of days, I have noticed that my car rides smoother. When I go over rough patches of roads, hit potholes, etc. the car does not creak and squeak like it used to, as I'm sure the dash isn't getting tweaked slightly as the chassis twists. Now, I get more of a clean thump from the front end. I also noted that the front end doesn't wash out as much, and holds a line better in the corners.


Produced locally here in Sacramento, CA USA





Check out The Car Passion Channel install Guide!